Process parameters and conditions for batch production of eco-fuel briquettes

DSpace/Manakin Repository

Show simple item record

dc.contributor.advisor Dr. R. Huberts en_US
dc.contributor.author Pilusa, Tsietsi Jefrey
dc.date.accessioned 2012-09-04T12:02:38Z
dc.date.available 2012-09-04T12:02:38Z
dc.date.issued 2012-09-04
dc.date.submitted 2011-03-16
dc.identifier.uri http://hdl.handle.net/10210/6894
dc.description M.Tech. en_US
dc.description.abstract In this work, eco-fuel briquettes made from a mixture of 32% spent coffee grounds, 23% coal fines, 11% saw dust, 18% mielie husks, 10% waste paper and 6% paper pulp contaminated water, respectively were investigated. Various processing stages such as briquetting, drying, combustion and flue gas emissions were investigated in order to evaluate the socio-economic viability of the batch production of eco-fuel briquettes from biomass waste material. Each stage was studied independently in order to develop basic models that contained material and energy balances. A screw press briquetting machine was designed and fabricated as part of this work to be tested against the legacy foundation Porta press, and the Bikernmayer hand brick press. The compaction of the biomass waste material into briquettes follows the principle of physical interlocking of the fine particles within the plant fibres, natural material binding due to released cellulose content, as well as reduction in porosity, due to a simultaneous dewatering and compaction action. The processing variables such as cycle times and pressure were studied. The Bikernmayer press is preferred as it produced briquettes of higher bulk densities and lower moisture content as compared to the other presses. The drying was investigated in a laboratory scale convective dryer to establish typical convection parameters. A drying system that utilizes produced briquettes as a heating medium is proposed, and here drying will be effected over a refractory brick fireplace by means of convection and radiation. A basic model was set up to include radiation with the convection to predict a drying time of 4.8 hours. The combustion of briquettes was investigated using a POCA ceramic stove linked to the testo Portable Emission Analyzer System. This enabled an air-to-fuel ratio of 1.44 and a burning rate of 2g per minute to be established. The energy transfer efficiency for boiling a pot of water was found to be 85%. The gas emissions were found to be within the acceptable limits, as set out by OSHA. A standard initial economic evaluation was performed based on a briquette selling price of R2.26 per kilogram for the ease of accommodating the local market. The financial model for both Porta press and screw press were not economically viable, as their running costs were greater than the gross project revenues. For the Bikernmayer conceptual model, with a total capital investment of R669, 981+ VAT (this includes one year operating cost) and a project life of five years, the gross Process parameters and conditions batch production of eco-fuel briquettes profit margin is 44%, the profitability index is 5.33 and the internal Rate of return 31.44%. The net present value and return period are R676, 896 and 0.408 years respectively. The customer profile as currently at hand is 17% of the selected area within 80 m radius from production site. The remaining 83% will be in need of energy as they become aware of the new product offering. The selling of the briquettes should be accompanied by an education process, to avoid the dangers of heating indoors. The principal driver for this project is socio economic development and it is being strengthened by Eskom’s inability to provide sufficient energy. A secondary driver is the global drive to reduce emissions and fossil fuel usage; this technology does exactly this whilst diverting waste from landfill. In the Polokwane declaration (2008), it is stated that South Africa will have no calorific waste to landfill by 2014. Hence legislation will also provide a major part of the drive. en_US
dc.language.iso en en_US
dc.subject Fuel en_US
dc.subject Combustion en_US
dc.subject Waste products as fuel en_US
dc.title Process parameters and conditions for batch production of eco-fuel briquettes en_US
dc.type Thesis en_US

Files in this item

This item appears in the following Collection(s)

Show simple item record

Search UJDigispace


Advanced Search

Browse

My Account